Dryer Repair in Las Vegas
Dryer running but clothes stay damp? We repair gas and electric dryers in Las Vegas and clear the lint blockages that cause most overheating.
Same-Day Slots
Everyday & Premium Brands
Quote Before Work
30-Day Labor / 90-Day Parts
Call Before Arrival
$85 Diagnostic
Common Dryer Repair Problems We Fix
- Not heating or drying clothes
- Takes too long to dry
- Drum not tumbling
- Loud squeaking or thumping
- Not starting
- Overheating
- Error codes
Dryer Repair Labor Pricing in Las Vegas
| Issue | Labor Starting Price |
|---|---|
| Diagnostic | $85 |
| Minor repair | $150–$250 |
| Major repair | $300–$500 |
Your final total depends on the model, the part that failed and how easily the appliance can be reached. The written quote is what you approve, not this table.
A dryer that runs for two cycles and still leaves jeans damp is wasting electricity or gas and may be overheating. We repair gas and electric dryers and, before replacing any part, we check the one thing that causes more service calls than any component: airflow.
What we check first
- Vent run. We measure airflow at the back of the dryer and at the exterior cap. Kinked foil duct and clogged hoods are very common.
- Heat source. On electric models, the element, high-limit thermostat and thermal fuse; on gas models, the igniter, flame sensor and gas valve coils.
- Drum rotation. Belt, idler pulley and motor if the drum does not tumble.
- Controls. Moisture sensor bars, timer or board when the dryer stops early or never starts.
Lint, dust and heat
Desert dust makes dryer lint finer and more clogging than in humid regions, and many valley homes run long vent lines through attics where summer temperatures soften and kink flexible duct. A blocked vent causes the thermal fuse to blow, the thermostat to trip and, in the worst case, a fire hazard. Cleaning the vent is sometimes the whole repair, and where it is, we do not invent a larger one.
Gas and electric differences
An electric dryer that tumbles but gives no heat usually needs an element or fuse. A gas dryer that tumbles with no heat more often points to a weak igniter. We confirm which with a meter, not a guess, because a gas-side fault needs the right replacement and a proper safety check.
Before you contact us
Read our guide to a dryer that runs but leaves clothes damp for safe observations about the load, selected cycle and installation. It explains what to record without opening the appliance or handling its connections.
Good to know
Dryer Repair FAQs
Why does my dryer take two cycles to dry a load?
Restricted airflow is by far the most common cause. A packed vent or lint screen housing reduces heat transfer even when the heating element is fine. We test airflow first.
Is it safe to keep running a dryer that gets very hot?
No. Excess heat usually means a blocked vent or failed thermostat. Stop using it until it has been inspected; blocked vents are a leading cause of dryer fires.
How often should a dryer vent be cleaned?
At least once a year, and more often for long vent runs, large families or pet owners. The lint trap catches only part of what the vent collects.
Do you repair gas dryers?
Yes. We service gas dryers, including igniter and valve work. If we find any gas leak or venting hazard we will explain it and not leave the dryer in use.
Appliance acting up?
Let's get it fixed.
Book online or call. The $85 diagnostic is credited toward your repair when you approve the work.