Dishwasher Repair in Las Vegas
Dishwasher leaving film, standing water or leaking at the door? Las Vegas repair for pumps, latches, spray arms and control boards.
Same-Day Slots
Everyday & Premium Brands
Quote Before Work
30-Day Labor / 90-Day Parts
Call Before Arrival
$85 Diagnostic
Common Dishwasher Repair Problems We Fix
- Not cleaning dishes properly
- Not draining after cycle
- Water leaking from door
- Door latch broken
- Not filling with water
- Loud grinding or rattling noise
- Error codes on panel
Dishwasher Repair Labor Pricing in Las Vegas
| Issue | Labor Starting Price |
|---|---|
| Diagnostic | $85 |
| Pump replacement | $200–$320 |
| Control board | $250–$400 |
| Door latch/seal | $120–$200 |
Your final total depends on the model, the part that failed and how easily the appliance can be reached. The written quote is what you approve, not this table.
Cloudy glasses, a pool of gray water at the bottom or a puddle on the kitchen floor all point to a dishwasher that has stopped doing its job. Because hard water and food residue each cause their own failures, we begin by working out which one you are dealing with.
What we check first
- Standing water. The filter, the drain hose loop or air gap, and the drain pump. In a home with a garbage disposal, we make sure the knockout plug was removed during installation.
- Poor cleaning. Spray arm holes, wash pump pressure and inlet water temperature.
- Leaks. Door gasket, tub seal, pump housing, inlet valve and water line fittings.
- Not starting. Door latch, control board and thermal fuse.
- Noise. A chopper blade or chunk of glass in the pump, or a worn motor bearing.
Hard water and the dishwasher
Las Vegas water leaves a chalky film on glassware and scale inside the heater housing and spray arms. Rinse aid and a periodic descale cycle help, and when a unit is badly scaled we clean the arms and filter during the visit. If your dishes come out gritty or white after a full cycle, a dosing or water-conditioning fix may do more than a part.
Built-in and premium models
Panel-ready and drawer dishwashers from brands such as Miele, Bosch, Thermador and Fisher & Paykel have sealed-circulation systems, specialty sensors and fussy installation. We take care to protect cabinetry and flooring while the unit is serviced and tested.
Good to know
Dishwasher Repair FAQs
Why is there standing water at the bottom of my dishwasher?
A blocked filter or drain hose is the most likely cause, followed by a failed drain pump. Some water can be normal near the sump, but visible gray water after a full cycle is not.
Why are my glasses cloudy even after a full cycle?
Cloudiness is typically either hard-water film or etching from detergent. Rinse aid and a vinegar or descaling cycle help with film. Etching cannot be reversed.
Can a dishwasher leak be repaired or is it a replacement?
Most leaks come from a gasket, hose clamp or inlet valve, and are inexpensive to repair. A cracked tub is the exception and usually justifies replacement.
What do error codes on my dishwasher mean?
Codes vary by brand and model, but they often point to drain, fill or heater faults. Take a photo of the code and the model label and we will have the right parts with us.
Appliance acting up?
Let's get it fixed.
Book online or call. The $85 diagnostic is credited toward your repair when you approve the work.